NSC-100, 15 Cubic yard compactor

Self-Contained Compactor











Specifications  
Overall Length 15' 11"
Overall Width 101"
Overall Height 94"
Container Capacity 15 Cu. Yds
Compactor Capacity 1 Cu. Yds
Platen Area 36" x 31 1/2" x 48"
Charge Opening 31" x 48"
Ram Penetration 8"
Twin Cylinders 2 1/2" x 36" x 1"
Line Pressure 2000 PSI
Max Line Pressure 2500 PSI
Max Ram Force 19500 LBS
Cycle Time 40 Seconds
Fluid Capacity 35 Gallons
Pump 5 GPM
Motor 5 HP/Tri-Volt, 3 Phase
App. Shipping Weight 5900 LBS
Compactor Features
  • 1/4" steel AR plate floor
  • 3/16" steel plate sides with 3" x 2 1/4" structural steel tubing.
  • Breaker bar 6" x 6" x 1/2" with retaining teeth.
  • 1/2" steel plate hydraulic cylinder mounts.
  • Replaceable 1/2" UHMW polyrthlene wear bars on all sides, tops and bottoms for a smooth, quiet and frictionless operation.
  • Weatherproof control panel and power pak.
  • Hinged/sealed lockable clean out door and top access panel.
  • Biodegradable hydraulic fluid
Electrical/Hydraulic Features
  • (PLC) Controlled power unit
  • E-Stop button
  • Automatic single cycle
  • Reverse button
  • 80% and 100% Full lights
  • Automatic shutdown
  • Keyed over-ride switch
  • Inlet fluid strainer
  • Moveable left or right side hydraulic and electrical connections.
Container Features
  • 1/8" steel plate floor with 4" x 2' x 1/4" structural steel tubing.
  • 1/4" steel plate sides and top
  • Full 3/4" thick door seal
  • Ratchet latch door closer
  • Heavy duty hinges with grease fitting
  • Tapered width from 58" at compactor to 68" at door.
  • Exclusive side and bottom, door latch system.




  • 5 Hp -230V, Single phase
  • Fluid reservoir heater
  • Multi-cycle timer
  • Remote control
  • Open hoppers (for loading dock or ground loading)
  • Enclosed doghouse with door and interlock
  • Walk on or drive on deck with 42" safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Cart dumper
  • Container guide rails









NSC-100-15 Side View















This Equipment Conforms to all ANSI Z 245.2 Safety Standards.