Roll-Off Receivers
Roll off receiverNedland roll-off receivers are backed by more than sixty years of service, design and manufacturing experience. Built for durability and reliability, Nedland roll-off receivers will provide many years of maintenance-free service. One-year warranty on all labor, parts and workmansh

  • Floor is 3/16" steel plate with 6"x 2"x 1/4" structural steel tubing with ½"x 2" steel bottom wear bars
  • 2" solid bull nose with 45* angle for ease of sliding on rails
  • Floor reinforced with 3" structural steel channel on 16" centers with 1/4" gussets floor is extended 3" to support bottom of door
  • Body construction is 7-gauge steel plate reinforced with 3/16" steel channels
  • Lower body construction is 3/16" steel plate 48" high x 96" long on rear sides
  • Side and top support channels are 3/16" steel plate
  • All exterior and interior wall to floor joints are continuous weldments
  • Tapered front and side walls on body interior
  • All side and top support channels have drain holes to prevent rusting
  • Four 10" wide x 8" high steel rear rollers with 2" axles and Two 4"x 4" solid steel front rollers with 1½" axles all with grease fittings
  • Door construction is 7-gauge steel plate and reinforced with 2"x 3"x 3/16"structural steel tubing and cross beams
  • Door latch located on drivers side of container for maximum safety and is a ratchet locking system
  • Door hinges are heavy duty 11/4" x 14" (Piano) type hinge assembly with grease fittings
  • Pull plate 3/4" with 1½" reinforced hook and ½"x 2" sag bar
  • Also constructed to fit Ampiroll, Stellar American Hook Lift, Multi-Lift Vulcan Swap-Loader and Dead Lift
  • All containers are Phosphotized cleaned and primed to 1.5 mil and painted to 1.5 mil on all interior and exterior surfaces



Roll off receiverNedland Receiver Containers are built from prime high quality steel plate and structural steel channel and tubing with all moving parts having grease fittings and full tapered interior. Nedland Receiver Containers are built to provide durability, reliability with many years of maintenance free service.









Model Cu. Yds. Skid Width Height
NROR-2114 21 14' 84" 72"
NROR-2514 25 14' 84" 84"
NROR-2416 24 16' 84" 72"
NROR-2816 28 16' 84" 84"
NROR-2718 27 18' 84" 72"
NROR-3018 30 18' 84" 84"
NROR-4020 40 20' 84" 90"
NROR-4222 42 22' 84" 90
Note: Interior dimensions listed.


All sizes are approximate, materials and product improvement is a continuous commitment at Nedland Industries. These specifications subject to change without notice.