Large open top roll off containers

Open Top Roll-offs

Roll off container Nedland Open Top Roll-Off Containers are manufactured in sizes from 6.5 Cu Yds to 80 Cu Yds and lengths from 10' to 40'. Nedland Open Top Roll-Off Containers are backed by Nedlands more than 60 years of service, design and manufacturing experience along with a one year warranty on all labor, parts and workmanship. Nedland Open Top Roll-Off Containers are built from prime high quality steel plate and structural steel channel and tubing, with all parts having grease fittings. Nedland Open Top Roll-Off Containers are built to provide durability, reliability with many years of maintenance free service.

  • Floor is 3/16" steel plate with 6"x 2"x 1/4" structural steel tubing
  • 2" solid bull nose with 45 degree angle for ease of sliding on rails
  • Floor reinforced with 3" structural steel channel on 16" centers with 1/4" gussets floor is extended 3" to support bottom of door
  • Side and top support channels are 10-gauge steel plate on 24" centers
  • Top rails are 5"x 3"x 3/16" structural steel tubing for extra strength and stability
  • All exterior and interior wall to floor joints are continuous weldments
  • All side and top support channels have drain holes to help against rusting, all fronts are full taper
  • Two 10" wide x 8" high steel rear rollers with 2" axles and Two 4" x 4" solid steel front rollers with 1 1/2" axles all with grease fittings
  • Body construction is 10-gauge steel Door construction is 10-gauge steel plate and reinforced with 2"x 3"x 3/16"structural steel tubing and cross beams
  • Door latch located on drivers side of container for maximum safety and is an adjustable positive cam lock system to prevent door bounce
  • Door hinges are heavy duty 11/4" x 14" (Piano) type hinge assembly with grease fittings
  • Pull plate 3/4" with 1½" reinforced hook and ½"x 2" sag bar
  • Also constructed to fit Ampiroll, Stellar American Hook Lift, Multi-Lift Vulcan Swap-Loader and Dead Lift
  • All containers are Phosphotized cleaned and primed to 1.5 mil and painted to 1.5 mil on all interior and exterior surfaces

Model Cu. Yards Skid Width Height
NRO-10x30 6.5 10' 101" 30"
NRO-10x36 8 10' 101" 36"
NRO-10x48 10 10' 101" 48"
NRO-12x30 8 12' 101" 30"
NRO-12x36 9.7 12' 101" 36"
NRO-12x43 10 12' 101" 43"
NRO-12x48 13 12' 101" 48"
NRO-12x60 16.2 12' 101" 60"
NRO-13x36 10.5 13' 101" 36"
NRO-13x43 12 13' 101" 43"
NRO-13x48 14 13' 101" 48"
NRO-13x60 17.6 13' 101" 60"
NRO-13x68 20 13' 101" 68"
NRO-14x36 11.2 14' 101" 36"
NRO-14x48 15 14' 101" 48"
NRO-14x60 18.6 14' 101" 60"
NRO-14x68 21 14' 101" 68"
NRO-16x36 12.8 16' 101" 36"
NRO-16x43 15 16' 101" 43"
NRO-16x48 17 16' 101" 48"
NRO-16x60 21.3 16' 101" 60"
NRO-16x72 25 16' 101" 72"
NRO-18x36 14.4 18' 101" 36"
NRO-18x40 16 18' 101" 40"
NRO-18x48 19.2 18' 101" 48"
NRO-18x60 24 18' 101" 60"
NRO-20x20 20 20' 101' 47"
NRO-20x22 20 22' 101' 43"
NRO-30x20 30 20' 101' 67"
NRO-30x22 30 22' 101' 60"
NRO-40x20 40 20' 101' 90"
NRO-40x22 40 22' 101' 82"
Note: Interior dimensions listed.



All sizes are approximate, materials and product improvement is a continuous commitment at Nedland Industries. These specifications subject to change without notice.