Posted by admin on July 14th 2008 in Uncategorized
Hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. The cylinder consists of a cylinder barrel, in which a piston connected to a piston rod is moving. The barrel is closed by the cylinder bottom and by the cylinder head where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder in two chambers, the bottom chamber and the piston rod side chamber. The hydraulic pressure acts on the piston to do linear work. A hydraulic cylinder is the actuator or “motor” side of this system. The “generator” side of the hydraulic system is the hydraulic pump, which brings a fixed or regulated flow of oil into the system. Mounting brackets or clevises are mounted to the cylinder bottom as well as the piston rod. By pumping hydraulic oil to the bottom side of the hydraulic cylinder, the piston rod starts moving upward. The piston pushes the oil in the other chamber back to the reservoir. If we assume that the oil pressure in the piston rod chamber is zero, the force on the piston rod equals the pressure in the cylinder times the piston area. If the oil is pumped into the piston rod side chamber and the oil from the piston area flows back to the reservoir without pressure, the pressure in the piston rod area chamber is Pull Force. In this way the hydraulic cylinder can both push and pull.
Posted by admin on July 14th 2008 in Uncategorized
The roll off truck hoist systems are frequently seen hauling roll offs filled with household garbage, construction debris, and metal scraps. These systems come in different sizes and are manufactured by many different companies world wide. One of the medium sized hoist is the EZ rolloff truck hoist system, which has a 20,000 pound hoist capacity. This hoist can carry up to a 25 cubic yard container. Some large systems carry up to a 40 yard container, which is for your very large work jobs.
Posted by admin on June 11th 2008 in Uncategorized
Biodegradable Hydraulic Oil is a premium lubricant designed to degrade to its natural state when subjected to sunlight, water and microbial activity. Biodegradable Hydraulic Oil is especially well suited for applications where environmental contamination due to leaking or blown hydraulic lines presents an environmental hazard.
Posted by admin on June 10th 2008 in Uncategorized
A compactor is a machine or mechanism used to reduce the size of waste material or soil through compaction.
Normally powered by hydraulics, compactors take many shapes and sizes.
Posted by admin on June 10th 2008 in Uncategorized
Powder Coating is a type of dry coating, which is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin.” The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals.
Posted by admin on April 22nd 2008 in Uncategorized
Nedland Industries manufactures the current line of EZrolloff 12,000# and 16,000# G.V.W. roll off trailers, containers and accessories. The EZrolloff trailer is the only roll off system in the industry to offer a five-year structural warranty on all equipment. This system has the most reliable wireless remote control, with the best available warranty. All trailers are powder coated. These systems come in pintle or gooseneck setup. This also is a standard outside rail cable pull system, which means that the containers can be used with a large rolloff truck. To learn more about the EZrolloff trailer systems log onto www.nedland.com
Posted by admin on April 22nd 2008 in Uncategorized
The Poly Dura Kan containers are 1/3 the weight of steel containers. These waste containers also have a five year warranty, which is the best containers warranty in the industry. The Poly Dura Kan containers are the first and longest manufactured plastic containers available. The frame and pockets on the containers are powder coated black to help prevent corrosion. The Poly Dura Kan product is built to last.
Posted by admin on April 9th 2008 in Uncategorized
Poly Dura Kans are rotationally molded plastic waste containers. This product is manufactured by Nedland Industries. These containers are available in front or rear load applications. The Poly Dura Kan has a verity of different sizes that range from 1.5 yards to 4 yards. These plastic containers are molded at Nedland Industries and can be manufactured in many different colors. www.polydurakan.com
Posted by admin on April 8th 2008 in Uncategorized
Nedland Industries continues to make changes on all of the products to better the customers, and now all of the power units that are used with Nedland equipment use biodegradable hydraulic fluid. That is a great improvement for that customers and the environment. As for the products that are now environmentally friendly they include; the complete line of EZrolloff trailer systems, roll off truck hoist along with all stationary and self-contained compactors.
To learn more about the products listed above and other products that are manufactured by Nedland Industries, log onto their web site at www.nedland.com.
